Jeep JL / Gladiator Under Hood ARB Twin/Single Compressor Mount
Jeep has stopped including the engine cover on new 2022+ Jeeps. Since the engine cover is not included the bracket to hold the cover has also been deleted and not included. If you did not receive an engine cover (started with some 2022 models and up) you may not have the required engine bracket needed for the UnderHood mount to work. See photos for a photo of the required bracket. Front Engine Cover Bracket Part Number (5281948AB)
Fits Jeep Gladiator & Jeep JL with 3.6L Engine ONLY. Does not fit the 3.6L eTorque, 2.0, Diesel or V8 engines.
Designed to mount the ARB Twin or Single Compressors, including the new brushless compressors. Included with the kit are: Compressor mounting plate, dual air chuck / rocker switch plate and mounting hardware. The compressor plate also includes small slots along both sides for zip ties once you have your airlines and wiring setup. We recommend using an adhesive heat shield on the bottom of the compressor mounting plate to help block radiant heat from the compressor. Heat shield NOT included.
Removal of the plastic engine cover is required to use this mount. There is a VERY slight amount of contact with the hood liner from a corner of the black casing of the compressor when using the ARB Twin on Rubicon models.
Optional "Air Kit" options available:
- "No Air Kit Needed" - includes compressor mounting plate, small front plate for air couplers and switch and mounting hardware. No air lines, fittings or air couplers are included in this kit.
- "Single Air Coupler Kit"- +$54.99 - includes compressor mounting plate, small front plate for air couplers and switch, mounting hardware, one 20" stainless air line, one ARB 90° air fitting and one ARB JIC-4 Air Coupler to mount on the front small plate of the compressor mount.
- "Dual Air Coupler Kit"- +$82.99 - includes compressor mounting plate, small front plate for air couplers and switch, mounting hardware, two 20" stainless air lines, one brass 3-way tee air fitting and two ARB JIC-4 Air Couplers to mount on the front small plate of the compressor mount.
- "ARB Manifold Kit" - +$129.99 - includes compressor mounting plate, mounting hardware, ARB Manifold kit, one 20" stainless air line, two ARB 90° air fittings, one 90° brass NPT fitting and one ARB 1/4" NPT Air Coupler. The small front plate is omitted from this kit as the manifold is mounted in that same location.
Also available to go along with the UnderHood Compressor Mount:
UnderHood Remote Air Filter / Dual Air Chuck Plate
UnderHood Remote Rocker Switch / Air Chuck Plate - Short
UnderHood Remote Rocker Switch / Air Chuck Plate - Long
Mount is 1/8" 5052 powder coated aluminum for superior corrosion resistance. Stainless steel mounting hardware included. No drilling required.
NOTE: Use of an adhesive heat shield is highly recommended. 813 Fabrication & Design is not responsible for any heat damage that may occur to your ARB compressor. Heat shield NOT included.
Patent Pending
Let customers speak for us
Great product. Just what I need to mount the compressor under the hood of rubicon gladiator. I have genesis duel battery under the hood it was a little tight had to relocate some of the cables but was able to fit. Used the rough country compressor no issues at all on mounting it.
Amazing customer service from Jeremy (owner of 813 Fabrication). Under Seat Mount went in easily without modification. Installed under driver's seat of my sons 2021 Gladiator Rubicon. Added drivers full length 813 plate for ARB Rocker Switch and Air Coupler, Added passenger ARB Air Coupler 813 plate to make filling tires easy on either side of the Jeep. The bracket allowed plenty of room to secure wiring right next to ARB Compressor. Great product and experience with 813 Fab. I will purchase from Jeremy again and will recommend his products to friends/family.
Jeremy is one of the best innovators and fabricators out there. All of his products are top notch. No complaints!
Awesome product—super easy to install! With the limited mounting options in my Alu-Cab Canopy Camper on my Tacoma, this was the perfect way to make the most of the space I have.
If you’re looking for a low profile, well made Starlink mini mount, this is it.
The simplicity but genius of the design is nothing short of brilliant.
The customer service of this company is fantastic.
Very well built mounting solution that keeps the control panel handy but out of the way while driving. The controller is mounted on an 813 driver's side under hood panel and this A-pillar mount fully completes the installation. Have had several positive comments about placement, fit and finish, and functionality. Before Jeremy added this to the website, I was trying to cobble something similar together using the Diode Dynamics bracket and some ball mounts attached to my overhead MOLLE panel...needless to say but this solution is so much better.
Awesome product and customer service
Fits perfectly
Perfect fit and finish.Shipping was faster than expected.
Very good quality fit as was stated worked great fast shipping owner was very nice and very nice notes in box would orderfrom them again Thanks
Perfect fit! Works great!
The first thing I noticed with this product was how much care was taken into creating this product. It a mounting plate ya, but the powder, shipping, etc all top notch. Product looks great, did exactly what I needed for a clean install of my Diode D-Switch. - Thank you!
Excellent product well made. Easy to install
Looks great and definitely cleaned up my wiring.
The mount plate is a perfect fit for my aux switch fuse box. Awesome quality and finish is great. Fast turnaround on the order too.
Will definitely be a repeat customer.
EXCELLENT PRODUCT
