Jeep Gladiator Aluminum Under Seat Storage Bin - Solid Front
This Under Seat Bin has a full SOLID front and choice of full MOLLE or solid base panel.
NOTE: If you choose the Solid Base option, you will need to drill two holes in the base for mounting your divider once you choose a location for it if you decide to use the divider. A hole in the Solid Front Bin is not required or recommended as it will take away on the sleek look of the bin.
ALL ALUMINUM Under Seat Storage Bin is designed to mount under the rear seats of the 2020+ Jeep Gladiator, replacing the stock bin that the truck comes with. There are two seat brackets, one bolting under each seat. The brackets interface with the Bin and lock using two independent locks that are bolted to the Bin's front panel. Either seat can be unlocked and lifted without the need to lift the other seat, they work independently. The base MOLLE panel is designed with a PALS compatible MOLLE pattern spaced correctly throughout the panels. The base panel also has correctly spaced holes for mounting the ARB Single or twin compressor anywhere along the panel.
The Under Seat Storage Bin is made from 1/8" black texture powder coated aluminum for superior corrosion resistance. Please keep in mind, this is NOT a high security locking box/enclosure/safe. This is a THEFT DETERRENT solution for storing your gear. This is not a gun safe and is not water or dust proof. 813 Fabrication & Design is not responsible for items that may be stolen from the Bin or heat damage that may be caused from an air compressor under the seat. We recommend lifting the rear seat before using your air compressor.
All Bin dividers come with three holes for mounting, you will NOT use the top mounting bracket in the Bin like the Full MOLLE Front model does. Since the front panel is solid and the base lets you mount the divider in any location, there is not a location to bolt down that bracket on the front. Doing so would have required a series of holes in the front panel taking away on it being a Solid Front model. When mounting the divider to the base, it is stronger to mount the two L-Brackets are on the opposite sides of each other. This should give your divider ample strength without needing the top bracket.
No drilling required. Two small cuts in the bottom side of the seat cover are required for seat bracket installation.
Included with the Under Seat Bin:
Base Panel, Front Panel, 2 Seat Brackets, 1 Divider, 2 locks, Rubber Trim and All Mounting Hardware.
Patent Pending
Let customers speak for us
All the shipment was a little bit longer than I had hoped. They did contact me and said they were getting my order together and there was a little issue with packing. But it got here earlier than they had said for the later date. Also, the locks weren't working correctly so within 4 days I had a brand new set of locks that actually didn't fall apart. Communication was awesome and this is a very good product.
Fits and works excellent and easy to install
it works perfectly where it is designed to go. Only issue I have is that the unit I am trying to mount is too long and I can only put 3 bolts in it to get it to work. Not your issue and it does securely hold my Scosche m8rix™ 8-gang switch panel. It also gave me enough room to route the wires under the mount which keeps them out of the way. All and all, I really like it. Thank you!
It all went fairly easy, as I had some contact to 813Fab before the order, due to need of International shipping.
I then went ahead and ordered 3 different products, all received flawlessly, well packed!!
Good service! We will see us again ;-)
Let me start off with my canopy camper door has been changed to swing open to the driver side (opposite of normal). That makes fitting the mounting bracket a custom fit because the bottom and top spacing of the door supports different. Following the provided direction and a bit of attack with a drill, everything went together without issue. The lock system is TOP SHELF. Works like a champ. It simplifies my life not worrying about padlocking the door. I bought several other items from 813 and they were equally well thought out and well made. For me - It was money well spent!
Great design, it’s exactly what I needed to mount rotapax. Orienting them to where I needed them took a bit. Mounting to bed rail took some time and effort because of obstacles already mounted in bed rail, but it’s done. Jeramy was excellent w contacting me right back when I had questions at all times of the day. I’ll b buying more from 813! Thank you
Great fit. Replaced the Auxbeam mount and it worked perfectly
Fit right into my 2024 3.6l JL. Sent a message with a question during install and had a response within an hour. Great product, great people to work with. Doesn't get better than that.
Great design, well built , and very easy to install. Love it. It made my switch panel controller look very clean.
Very impressed with the mounting hardware quality - 813 produced- packing, and overall experience. Great owner.
Very well made. Exactly what I needed to complete my joolca installation. Company has a host of excellent & innovative products.
Customer Reviews
All the shipment was a little bit longer than I had hoped. They did contact me and said they were getting my order together and there was a little issue with packing. But it got here earlier than they had said for the later date. Also, the locks weren't working correctly so within 4 days I had a brand new set of locks that actually didn't fall apart. Communication was awesome and this is a very good product.
This is a very well thought out design that is adjustable to your needs. Fitment is 100% perfect. No “making it fit” here. Very happy with it
Excellent product with clear directions, well thought out and concise.
I ordered the rear seat storage for my gladiator. Very well made product and instructions were spot on. Had an issue with one of the locks which sometimes things happen beyond anyone's control. I had a replacement in 2 days.
Keep up the great work team !!
