Jeep Gladiator Aluminum Under Seat Storage Bin - Full MOLLE Front
This Jeep Gladiator Under Seat Bin has a full MOLLE front and full MOLLE base panel.
NOTE: If you choose the Solid Base option, you will need to drill two holes in the base for mounting your divider once you choose a location for it if you decide to use the divider.
ALL ALUMINUM Under Seat Storage Bin is designed to mount under the rear seats of the 2020+ Jeep Gladiator, replacing the stock bin that the truck comes with. There are two seat brackets, one bolting under each seat. The brackets interface with the Bin and lock using two independent locks that are bolted to the Bin's front panel. Either seat can be unlocked and lifted without the need to lift the other seat, they work independently. Both front and base MOLLE panels are designed with a PALS compatible MOLLE pattern spaced correctly throughout the panels. The base panel also has correctly spaced holes for mounting the ARB Single or twin compressor anywhere along the panel. The full MOLLE front panel also has an air coupler and rocker switch hole on each side for setting up an onboard air system under the seat. We suggest using ARB JIC-4 air couplers for the Bin, they bolt on directly to the Bin with no extra hardware needed. If you use the ARB 1/4" NPT air coupler you will also need bulkhead fittings for attaching thise air couplers to the Bin. If you choose not to use an air coupler and rocker switch, the Bin comes with inserts to close those holes.
The Under Seat Storage Bin is made from 1/8" black texture powder coated aluminum for superior corrosion resistance. Please keep in mind, this is NOT a high security locking box/enclosure/safe. This is a THEFT DETERRENT solution for storing your gear. This is not a gun safe and is not water or dust proof. 813 Fabrication & Design is not responsible for items that may be stolen from the Bin or heat damage that may be caused from an air compressor under the seat. We recommend lifting the rear seat before using your air compressor.
No drilling required. Two small cuts in the bottom side of the seat cover are required for seat bracket installation.
Included with the Under Seat Bin:
Base Panel, Front Panel, 2 Seat Brackets, 1 Divider, 2 locks, Rubber Trim and All Mounting Hardware.
Air compressor, air coupler, air lines and rocker switch NOT included.
Patent Pending
Let customers speak for us
Fits and works excellent and easy to install
it works perfectly where it is designed to go. Only issue I have is that the unit I am trying to mount is too long and I can only put 3 bolts in it to get it to work. Not your issue and it does securely hold my Scosche m8rix™ 8-gang switch panel. It also gave me enough room to route the wires under the mount which keeps them out of the way. All and all, I really like it. Thank you!
It all went fairly easy, as I had some contact to 813Fab before the order, due to need of International shipping.
I then went ahead and ordered 3 different products, all received flawlessly, well packed!!
Good service! We will see us again ;-)
Let me start off with my canopy camper door has been changed to swing open to the driver side (opposite of normal). That makes fitting the mounting bracket a custom fit because the bottom and top spacing of the door supports different. Following the provided direction and a bit of attack with a drill, everything went together without issue. The lock system is TOP SHELF. Works like a champ. It simplifies my life not worrying about padlocking the door. I bought several other items from 813 and they were equally well thought out and well made. For me - It was money well spent!
Great design, it’s exactly what I needed to mount rotapax. Orienting them to where I needed them took a bit. Mounting to bed rail took some time and effort because of obstacles already mounted in bed rail, but it’s done. Jeramy was excellent w contacting me right back when I had questions at all times of the day. I’ll b buying more from 813! Thank you
Great fit. Replaced the Auxbeam mount and it worked perfectly
Fit right into my 2024 3.6l JL. Sent a message with a question during install and had a response within an hour. Great product, great people to work with. Doesn't get better than that.
Great design, well built , and very easy to install. Love it. It made my switch panel controller look very clean.
Very impressed with the mounting hardware quality - 813 produced- packing, and overall experience. Great owner.
Very well made. Exactly what I needed to complete my joolca installation. Company has a host of excellent & innovative products.
This Molle Panel in the half form is the perfect size. It is well made and most of all was the packaging. It was shipped fast and very well protected. This is definitely a company that takes great pride in what they do and it shows.
