Alu-Cab Camper / ModCAP Bulkhead RotopaX Mount
Our Alu-Cab Bulkhead RotopaX Mount was designed to fit between the outside bulkhead and truck cab for both Mid-Size and Full-Size Alu-Cab Canopy Campers, Alu-Cabins and the new ModCAP Campers. The mount can also be mounted to bed racks, trailers, truck beds, etc., anything with a flush mounting surface in a horizontal or vertical direction. Made from 3.2mm powder coated stainless steel. Not all trucks have enough space between the camper and cab but those that do, this is a simple mount for carrying a 2 gallon RotopaX container for fuel or water.
The RotopaX Standard Pack Mount is recommended for use with the mount. The space is tight and the shorter standard T-handle will thread on the easiest. In order to mount the RotopaX container, the t-handle must be completely removed. Once the container is in place, thread the t-handle on to the mount to secure the container.
M8 stainless mounting hardware included. RotopaX Mount SOLD SEPARATELY.
Use at your own risk. 813 Fabrication & Design is not responsible for damage that may occur during off-roading / flexing of the vehicle.
Let customers speak for us
813 Fabrication and Jeremy are the best! These panels are super sturdy. I got the 1/2 molle panels installed with the mounts for the hi-lift jack. Used the 1" HDPE spacers and 50mm m6 bolts to secure the 5 bottom panel holes with m6 rivnuts... and of course mounted under the trail / bed rails. A quality 813 Fabrication addition to my Gladiator.
Found this product using Ai. Put in my requirements and then sorted through the top 3 top options. Shipping was fast and well packed. I’ve had 4 vehicles with ARB onboard air and 3 of them were +21 Jeeps - under the seat. The other 23 bronco raptor - not relevant.
I installed this mount with an ARB Twin compressor under the passenger power seat of my 2027 Wrangler 392.
The quality of this bracket is absolutely exceptional. The design, machining, and powder coating is top notch, right down to the logo, which actually complements the design rather than detracting from it. Everything about the bracket looks and feels high-end. From a craftsmanship standpoint, I really can’t think of another compressor mount that comes close.
My biggest complaint is the positioning of the compressor mounting slots. Interestingly, there’s already another set of slots that would have allowed the compressor to sit maybe 1 inch farther back, closer to the rear kick panel. Unfortunately, those slots were just barely out of alignment with the compressor’s mounting points. I considered drilling additional holes but ultimately made it work. One thing I had to do was disconnecting and repositioning several factory wiring harnesses under the passenger seat (not the ones on the floor those stayed in place, but the plugs directly under the seat cushion). I guess I could have just rotated the air hose on top of the compressor. That worked good in the past but I didn’t feel like taking the compressor apart.
To add more optional clearance between the compressor mounting plate and the power seat mechanism. “This was just cause I wanted to know for certain it would likely never snag anything, but not completely required” - - - I ended up installing 1/4-inch spacers between the seat and mounting bracket. (I deleted the spare tire and just used the swing gate hinge washers which were exactly 1/4 ea”) This also required longer bolts for the rear seat mounts, although the factory bolts still worked up front. I live in Moab so parts are hard to come by.
That said, once everything was installed, it turned out great. I also purchased the full-length passenger-side seat rail plate and installed an air coupler there, along with running a second air line to a coupler on the front bumper. Having two convenient air connection points is a great feature. If the exterior line ever breaks I can just put a jic cap under the seat and back in business. A valve would be even quicker to isolate pathways.
I would definitely recommend and would buy again. Thank you
Prefect fit and finish. Another great product!
Great communication and fast shipping! Thank you for a great product too!
Perfect . Used it to mount my inline fuses. I’m about to order another for my winch switch !!!!
The custom metal JL Tailgate Molle Panel is excellent. The custom work and fit are perfect for my needs. I was looking to mount a tv for tailgating purposes and Jeremy worked with me to craft a custom metal molle panel. The fit and install were easy. I fully recommend working with Jeremy at 813 for your needs.
I've purchased several products from 813 and have never been disappointed. Jeremy is quick to respond [even when not necessarily product related]. I recently purchased the new locker for the Alu Cab door and let me tell ya, this thing is bad a$@... I absolutely love it. I cant wait to see whats next from this great company.
Had a question about set up. Resolved immediately. Works great. Thank you for the service
Rock light mounting bracket fit Baja designs light perfectly!
Fit and finish are great! 813 has come through once again.
Installed this on the 2021 Jeep Gladiator. It held the Warn Interrupt solenoid and the distribution for the AUX Switch power.
Well built just what was needed.
Perfect mounting plate for what we needed! Fitment was spot on and the product is great quality
Just what we needed to complete our container conversions. High quality and fast shipping!
The mount is well made and it was easy to install. It fit perfectly.
